FHIA, Vertical Suction Filter

FH series suction filters are compact and lightweight. Designed with an aluminum casted housing. Element can be replaced by simply opening the cover to detach the element without touching the pipes. The filter can be fitted with a differential pressure indicator which senses when the element is becoming dirty, facilitating maintenance and helping to avoid pump damage such as cavitations. The FHG series suction guard was designed to prevent collected dust from falling into the tank. Since all dust is eliminated during trial operation, it is not necessary to replace flushing oil. Options include differential pressuare indicator, differential pressure indication switch, air breezer, and cap.

• Compact and lightweight due to aluminum casted housing
• Easy element replacement
• No drain port required
• Elimination of all collected matter
• Non-standard filtration available

Configuration Options

Select Product Options

	Select values from the drop down lists or make appropriate selections to configure the part number.
Hydraulic Fluid	-- Pick an Option -- N (Petroleum) W (Water-Glycol, Emulsion) V (Phosphoric Ester)
Port Size	-- Pick an Option -- 04 (1/2) 06 (3/4) 08 (1) 10 (1 1/4) 12 (1 1/2) 16 (2) 20 (2 1/2) 24 (3) 28 (3 1/2) 32 (4)
Filtration	-- Pick an Option -- 003 (3 μm) 005 (5 μm) 010 (10 μm) 020 (20 μm) 040 (40 μm) 074 (74 μm) 105 (105 μm) 149 (149 μm) 270 (270 μm)
Differential Pressure Indication	-- Pick an Option -- M (Differential Pressure Indicator) E (Differential Pressure Indication Switch) D [None (Blanking Cap)]
Relief Valve	-- Pick an Option -- R (With Relief Valve) D [None (Blanking Plate)]
Made to Order	-- Pick an Option -- None X0 (Non-standard Filtration)
	Options in: Gray are not compatible with other selected option value. Red conflict with another selected option value. Amber are not recommended.