The RMW-900 Series regulators are designed for applications requiring miniature size, light weight, and precision. 10-32 ports accommodate a wide range of miniature fittings.

Features

• Twenty turn, hysteresis free adjustment allows pressure settings to 1” WC resolution.
• Four adjusting styles allow maximum design flexibility. The non-rising stem is available with an attractive knob, or plain, allowing installation of OEM knobs. Also available is a flush adjusting shaft, for applications where the setting is changed less frequently. Factory pre-set “tamperproof” models are also available.
• Three mounting options include panel mount, through a 9/16” hole (nut included), and base mount, through 4 ø .125 holes, and manifold mount (See drawings).
• Plastic construction - Corrosion resistant wetted materials.
• High accuracy - Low effect of supply variation on output.
• Low cost - Perfect for OEM applications.
• Applications:
  • Medical Equipment (Oxygen Concentrators, Ventilator / Respirators, Nebulizers)
  • Air Bearings
  • HVAC Systems
  • Custom Machinery
  • Robotics
• Options:
  • Oxygen Clean
  • Factory Preset
  • Factory Installed Fittings

Specifications

• Regulator Type: Constant Bleed, Relieving
• Wetted Materials: Polysulfone, Buna-N, EPDM, Acetal, Polyurethane, Stainless Steel
• Supply Consumption:
  • < 9 SCIM (150 cc/min) @ 30 PSI (207 kPa) supply
  • < 21 SCIM (350 cc/min) @ 100 PSI (689 kPa) supply
• Max Supply: 150 PSI (1.03 MPa)
• Temperature Range: 40° - 150° F (4° - 66° C)
• Effect of Supply Variation: < .07 PSI (.48 kPa) per 10 PSI (68.9 kPa) supply change when dead ended
• Repeatability: < ±.1 PSI (.69 kPa) when supply is removed and re-applied
• Sensitivity: 1" H2O (.25 kPa)
• Maximum Flow: 2.3 cu. ft/min. (65 LPM)
• Relief Capacity: .5 cu. ft/min. (14 LPM) with outlet 5 PSI (34.5 kPa) above set-point
• Recommended Filtration: 5 micron

Available Pressure Ranges (PSI): 0.5 - 3.5, 0.5 - 10, 0.5 - 30, 0.5 - 60, 0.5 - 90

Stocked Configurations Below Can Ship Same Day

Part Number	Description
RMW-900-3.5-W/K	3.5 PSI with Adjusting Knob
RMW-900-10-W/K	10 PSI with Adjusting Knob
RMW-900-30-W/K	30 PSI with Adjusting Knob
RMW-900-60-W/K	60 PSI with Adjusting Knob
RMW-900-90-W/K	90 PSI with Adjusting Knob

The RMW-900 Series regulators are designed for applications requiring miniature size, light weight, and precision. 10-32 ports accommodate a wide range of miniature fittings.

Features

• Twenty turn, hysteresis free adjustment allows pressure settings to 1” WC resolution.
• Four adjusting styles allow maximum design flexibility. The non-rising stem is available with an attractive knob, or plain, allowing installation of OEM knobs. Also available is a flush adjusting shaft, for applications where the setting is changed less frequently. Factory pre-set “tamperproof” models are also available.
• Three mounting options include panel mount, through a 9/16” hole (nut included), and base mount, through 4 ø .125 holes, and manifold mount (See drawings).
• Plastic construction - Corrosion resistant wetted materials.
• High accuracy - Low effect of supply variation on output.
• Low cost - Perfect for OEM applications.
• Applications:
  • Medical Equipment (Oxygen Concentrators, Ventilator / Respirators, Nebulizers)
  • Air Bearings
  • HVAC Systems
  • Custom Machinery
  • Robotics
• Options:
  • Oxygen Clean
  • Factory Preset
  • Factory Installed Fittings

Specifications

• Regulator Type: Constant Bleed, Relieving
• Wetted Materials: Polysulfone, Buna-N, EPDM, Acetal, Polyurethane, Stainless Steel
• Supply Consumption:
  • < 9 SCIM (150 cc/min) @ 30 PSI (207 kPa) supply
  • < 21 SCIM (350 cc/min) @ 100 PSI (689 kPa) supply
• Max Supply: 150 PSI (1.03 MPa)
• Temperature Range: 40° - 150° F (4° - 66° C)
• Effect of Supply Variation: < .07 PSI (.48 kPa) per 10 PSI (68.9 kPa) supply change when dead ended
• Repeatability: < ±.1 PSI (.69 kPa) when supply is removed and re-applied
• Sensitivity: 1" H2O (.25 kPa)
• Maximum Flow: 2.3 cu. ft/min. (65 LPM)
• Relief Capacity: .5 cu. ft/min. (14 LPM) with outlet 5 PSI (34.5 kPa) above set-point
• Recommended Filtration: 5 micron

Available Pressure Ranges (PSI): 0.5 - 3.5, 0.5 - 10, 0.5 - 30, 0.5 - 60, 0.5 - 90

Stocked Configurations Below Can Ship Same Day

Part Number	Description
RMW-900-3.5-W/K	3.5 PSI with Adjusting Knob
RMW-900-10-W/K	10 PSI with Adjusting Knob
RMW-900-30-W/K	30 PSI with Adjusting Knob
RMW-900-60-W/K	60 PSI with Adjusting Knob
RMW-900-90-W/K	90 PSI with Adjusting Knob

The RMW-900 Series regulators are designed for applications requiring miniature size, light weight, and precision. 10-32 ports accommodate a wide range of miniature fittings.

Features

• Twenty turn, hysteresis free adjustment allows pressure settings to 1” WC resolution.
• Four adjusting styles allow maximum design flexibility. The non-rising stem is available with an attractive knob, or plain, allowing installation of OEM knobs. Also available is a flush adjusting shaft, for applications where the setting is changed less frequently. Factory pre-set “tamperproof” models are also available.
• Three mounting options include panel mount, through a 9/16” hole (nut included), and base mount, through 4 ø .125 holes, and manifold mount (See drawings).
• Plastic construction - Corrosion resistant wetted materials.
• High accuracy - Low effect of supply variation on output.
• Low cost - Perfect for OEM applications.
• Applications:
  • Medical Equipment (Oxygen Concentrators, Ventilator / Respirators, Nebulizers)
  • Air Bearings
  • HVAC Systems
  • Custom Machinery
  • Robotics
• Options:
  • Oxygen Clean
  • Factory Preset
  • Factory Installed Fittings

Specifications

• Regulator Type: Constant Bleed, Relieving
• Wetted Materials: Polysulfone, Buna-N, EPDM, Acetal, Polyurethane, Stainless Steel
• Supply Consumption:
  • < 9 SCIM (150 cc/min) @ 30 PSI (207 kPa) supply
  • < 21 SCIM (350 cc/min) @ 100 PSI (689 kPa) supply
• Max Supply: 150 PSI (1.03 MPa)
• Temperature Range: 40° - 150° F (4° - 66° C)
• Effect of Supply Variation: < .07 PSI (.48 kPa) per 10 PSI (68.9 kPa) supply change when dead ended
• Repeatability: < ±.1 PSI (.69 kPa) when supply is removed and re-applied
• Sensitivity: 1" H2O (.25 kPa)
• Maximum Flow: 2.3 cu. ft/min. (65 LPM)
• Relief Capacity: .5 cu. ft/min. (14 LPM) with outlet 5 PSI (34.5 kPa) above set-point
• Recommended Filtration: 5 micron

Available Pressure Ranges (PSI): 0.5 - 3.5, 0.5 - 10, 0.5 - 30, 0.5 - 60, 0.5 - 90

Stocked Configurations Below Can Ship Same Day

Part Number	Description
RMW-900-3.5-W/K	3.5 PSI with Adjusting Knob
RMW-900-10-W/K	10 PSI with Adjusting Knob
RMW-900-30-W/K	30 PSI with Adjusting Knob
RMW-900-60-W/K	60 PSI with Adjusting Knob
RMW-900-90-W/K	90 PSI with Adjusting Knob

The RMW-900 Series regulators are designed for applications requiring miniature size, light weight, and precision. 10-32 ports accommodate a wide range of miniature fittings.

Features

• Twenty turn, hysteresis free adjustment allows pressure settings to 1” WC resolution.
• Four adjusting styles allow maximum design flexibility. The non-rising stem is available with an attractive knob, or plain, allowing installation of OEM knobs. Also available is a flush adjusting shaft, for applications where the setting is changed less frequently. Factory pre-set “tamperproof” models are also available.
• Three mounting options include panel mount, through a 9/16” hole (nut included), and base mount, through 4 ø .125 holes, and manifold mount (See drawings).
• Plastic construction - Corrosion resistant wetted materials.
• High accuracy - Low effect of supply variation on output.
• Low cost - Perfect for OEM applications.
• Applications:
  • Medical Equipment (Oxygen Concentrators, Ventilator / Respirators, Nebulizers)
  • Air Bearings
  • HVAC Systems
  • Custom Machinery
  • Robotics
• Options:
  • Oxygen Clean
  • Factory Preset
  • Factory Installed Fittings

Specifications

• Regulator Type: Constant Bleed, Relieving
• Wetted Materials: Polysulfone, Buna-N, EPDM, Acetal, Polyurethane, Stainless Steel
• Supply Consumption:
  • < 9 SCIM (150 cc/min) @ 30 PSI (207 kPa) supply
  • < 21 SCIM (350 cc/min) @ 100 PSI (689 kPa) supply
• Max Supply: 150 PSI (1.03 MPa)
• Temperature Range: 40° - 150° F (4° - 66° C)
• Effect of Supply Variation: < .07 PSI (.48 kPa) per 10 PSI (68.9 kPa) supply change when dead ended
• Repeatability: < ±.1 PSI (.69 kPa) when supply is removed and re-applied
• Sensitivity: 1" H2O (.25 kPa)
• Maximum Flow: 2.3 cu. ft/min. (65 LPM)
• Relief Capacity: .5 cu. ft/min. (14 LPM) with outlet 5 PSI (34.5 kPa) above set-point
• Recommended Filtration: 5 micron

Available Pressure Ranges (PSI): 0.5 - 3.5, 0.5 - 10, 0.5 - 30, 0.5 - 60, 0.5 - 90

Stocked Configurations Below Can Ship Same Day

Part Number	Description
RMW-900-3.5-W/K	3.5 PSI with Adjusting Knob
RMW-900-10-W/K	10 PSI with Adjusting Knob
RMW-900-30-W/K	30 PSI with Adjusting Knob
RMW-900-60-W/K	60 PSI with Adjusting Knob
RMW-900-90-W/K	90 PSI with Adjusting Knob

The RMW-900 Series regulators are designed for applications requiring miniature size, light weight, and precision. 10-32 ports accommodate a wide range of miniature fittings.

Features

• Twenty turn, hysteresis free adjustment allows pressure settings to 1” WC resolution.
• Four adjusting styles allow maximum design flexibility. The non-rising stem is available with an attractive knob, or plain, allowing installation of OEM knobs. Also available is a flush adjusting shaft, for applications where the setting is changed less frequently. Factory pre-set “tamperproof” models are also available.
• Three mounting options include panel mount, through a 9/16” hole (nut included), and base mount, through 4 ø .125 holes, and manifold mount (See drawings).
• Plastic construction - Corrosion resistant wetted materials.
• High accuracy - Low effect of supply variation on output.
• Low cost - Perfect for OEM applications.
• Applications:
  • Medical Equipment (Oxygen Concentrators, Ventilator / Respirators, Nebulizers)
  • Air Bearings
  • HVAC Systems
  • Custom Machinery
  • Robotics
• Options:
  • Oxygen Clean
  • Factory Preset
  • Factory Installed Fittings

Specifications

• Regulator Type: Constant Bleed, Relieving
• Wetted Materials: Polysulfone, Buna-N, EPDM, Acetal, Polyurethane, Stainless Steel
• Supply Consumption:
  • < 9 SCIM (150 cc/min) @ 30 PSI (207 kPa) supply
  • < 21 SCIM (350 cc/min) @ 100 PSI (689 kPa) supply
• Max Supply: 150 PSI (1.03 MPa)
• Temperature Range: 40° - 150° F (4° - 66° C)
• Effect of Supply Variation: < .07 PSI (.48 kPa) per 10 PSI (68.9 kPa) supply change when dead ended
• Repeatability: < ±.1 PSI (.69 kPa) when supply is removed and re-applied
• Sensitivity: 1" H2O (.25 kPa)
• Maximum Flow: 2.3 cu. ft/min. (65 LPM)
• Relief Capacity: .5 cu. ft/min. (14 LPM) with outlet 5 PSI (34.5 kPa) above set-point
• Recommended Filtration: 5 micron

Available Pressure Ranges (PSI): 0.5 - 3.5, 0.5 - 10, 0.5 - 30, 0.5 - 60, 0.5 - 90

Stocked Configurations Below Can Ship Same Day

Part Number	Description
RMW-900-3.5-W/K	3.5 PSI with Adjusting Knob
RMW-900-10-W/K	10 PSI with Adjusting Knob
RMW-900-30-W/K	30 PSI with Adjusting Knob
RMW-900-60-W/K	60 PSI with Adjusting Knob
RMW-900-90-W/K	90 PSI with Adjusting Knob