| PF2A712H | Dry air, Nitrogen | Heater type | 600 to 12000 l/min | 10 l/min | l/min, CFM | l, m3, m3 x 103, ft3, ft3 x 103, ft3 x 106 | 0.1 to 1.5 MPa | 2.25 MPa | 20 kPa (at maximum flow rate) | 0 to 9,999,999,999 l | ?1.5% F.S. or less (0.7 MPa, at 20C) | ?1.0% F.S. or less (0.7 MPa, at 20C), ?3.0% of F.S. or less in case of analog output | ?1.5% F.S. or less (0.1 to 1.5 MPa, based on 0.7 MPa) | ?2.0% F.S. or less (0 to 50C, based on 25C) | NPN open collector Max. load current: 80 mA; Max. applied voltage: 30 V; Internal voltage drop: 1 V or less (with load current of 80 mA) | PNP open collector Max. load current: 80 mA; Internal voltage drop: 1.5 V or less (with load current of 80 mA) | NPN or PNP open collector Flow rate per pulse: 100 l/pulse, 10.0 ft3/pulseON time per pulse width: 50 msec | Output voltage: 1 to 5 V; Load impedance: 100 k or more | Output current: 4 to 20 mA; Load impedance: 250 or less | 1 sec. or less | Hysteresis mode: Variable (can be set from 0); Window comparator mode: (can be set from 0 to 3% F.S.) | 24 VDC (ripple ?10% or less) | 150 mA or less | IP65 | 0 to 50C (with no freezing and condensation) | 1000 VAC for 1 min. between external terminal and case | 50M (500 VDC Mega) between external terminal and case | 10 to 500 Hz with a 1.5 mm amplitude or 98 m/s2 acceleration, in each X, Y, Z direction for 2 hrs, whichever is smaller. | 490 m/s2 in X, Y, Z directions 3 times each | 1000 Vp-p, Pulse width 1 ?s, Rise time 1 ns | 2.0 kg (without lead wire) | 2 |
